Metering Pump Satisfies The Requirement Of Measuring Precision

Oct 12, 2017

Leave a message

A metering pump is a pump capable of adjusting and conveying the medium accurately by means of a flow (or length of travel) regulating mechanism (or equipment), directed by the flow (or relative length of travel) indicating the body (or equipment). According to the structure type of the hydraulic end of the metering pump, the metering pump is divided into four kinds, such as plunger type, Metering Pump hydraulic diaphragm type, mechanical diaphragm type and corrugated pipe metering pump. Plunger type, Metering Pump hydraulic diaphragm type application is relatively wide.

The characteristics of metering pump also has the following characteristics:

(1) Pump in the operation process, the flow can be used according to the need from close. % to 100% in the range of stepless adjustment;

(2) The liquid can be measured, Metering Pump and can meet a certain measurement accuracy requirements. The general precision is ±1%, the design spayed makes the fine person, the accuracy can reach ± 0.3%.

The metering pump has been widely used in chemical industry, petroleum, papermaking, foodstuff, plastics, pharmacy and daily-use chemical industry because of its outstanding characteristics. It is often used to transport strong corrosive liquids, suspensions, molten liquids, radioactive liquids, Metering Pump flammable and explosive liquids, poisonous liquids, liquefied gases or liquid metals.

metering pump flow, usually can be manual, electric or pneumatic automatic adjustment. In the automatic control system of continuous or semi-continuous process system, the pump flow can be monitored according to the parameters of temperature, pressure, density and ph value.

The main points of metering pump selection: According to the requirements of different occasions, how to choose the different kinds of metering pump, the following information is very important.

1 The flow of the measured liquid, the requirements of measurement accuracy.

2 The main characteristics of the liquid being measured, Metering Pump such as chemical corrosivity, viscosity, concentration and density.

3 The back pressure of the system.

4) The appropriate height of the suction lift.

5 Other options, such as analog control, impulse control, Metering Pump flow monitoring and timer.

6 environmental requirements for equipment.


Send Inquiry
Send Inquiry